The Purpose of a Deep Foundation
A foundation has one primary role—to transfer the weight of a structure safely to the ground. Shallow foundations work well for smaller buildings or stable soil conditions, but when the upper soil layers are weak or compressible, engineers go deeper. At depths like tujuh meter, the goal is to reach stronger soil or rock that can bear the building’s load without shifting or settling.
Such depth is often required for heavy buildings, bridges, towers, or industrial plants. Deep foundations distribute loads vertically and horizontally, reducing the risk of uneven settlement that could crack walls or distort columns. They also help counteract uplift forces from wind or groundwater pressure.
Site Investigation and Soil Testing
Before any digging begins, engineers perform detailed site investigations to understand what lies beneath the surface tujuh meter. This process includes drilling boreholes, collecting soil samples, and testing for properties like moisture content, bearing capacity, and shear strength.
Soil behavior can vary dramatically even within a few meters. Clay soils hold water and expand, while sandy soils drain quickly but may shift under heavy loads. Engineers analyze these results to determine how deep the foundation should go and what materials are needed to reinforce it.
At seven meters, the design might encounter mixed layers—soft clay above and dense sand or gravel below. Understanding these transitions is crucial for deciding whether to use a continuous footing, piles, or a raft foundation.
Choosing the Right Type of Foundation
Several foundation types can extend to a depth of seven meters, depending on site conditions and structural requirements.
Raft or Mat Foundation
A raft foundation spreads the load across a large area, acting like a thick concrete slab that “floats” over weaker soil. When extended deeper, it may include multiple layers of reinforcement and waterproofing to handle both pressure and moisture.
Pile Foundation
Piles are long, slender columns made of concrete, steel, or timber that transfer the building’s load to deeper, stronger soil or rock layers. For a seven-meter depth, short bored piles or precast driven piles are common. They are ideal when upper layers are unstable or when groundwater levels are high.
Caisson or Pier Foundation
Caissons are large, cylindrical shafts built into the ground, often used for bridge piers or waterfront structures. They provide stability and resist both compression and lateral forces. For medium-depth applications like seven meters, open caissons or drilled shafts can serve as durable supports.
Each foundation type requires a unique construction approach, equipment, and level of precision.
The Construction Process
Excavation and Dewatering
Digging to a depth of seven meters demands careful control of soil and water. Excavation may be performed in stages, using shoring or retaining systems to prevent the walls from collapsing. In areas with a high water table, engineers install dewatering pumps to remove groundwater and keep the work area dry.
Base Preparation
Once the desired depth is reached, the base of the excavation must be leveled and compacted. A stable base ensures that the foundation’s load is evenly distributed. In some cases, a lean concrete layer is poured to create a clean and level surface for further work.
The Purpose of a Deep Foundation
0
Steel reinforcement bars (rebar) are arranged according to structural design specifications. These bars form a skeleton that strengthens the concrete and prevents cracking under stress. Wooden or metal formwork holds the concrete in place while it sets.
The Purpose of a Deep Foundation
1
Concrete is poured in layers to avoid air pockets and ensure uniform strength. Vibration tools are used to compact the mix, removing trapped air. The curing process—keeping the concrete moist and at a stable temperature—is vital for achieving long-term durability.
The Purpose of a Deep Foundation
2
Every stage of construction undergoes inspection. Engineers verify dimensions, material quality, and reinforcement placement. They may take concrete samples to test compressive strength in a laboratory before continuing with upper-level construction.
The Purpose of a Deep Foundation
3
At a depth of seven meters, groundwater becomes a serious concern. Hydrostatic pressure from surrounding water can seep into the foundation, weakening materials or causing uplift. Engineers combat this using waterproofing membranes, drainage layers, and sump pumps to direct water away from the structure.
Lateral soil pressure also increases with depth. Retaining systems such as sheet piles, soldier piles, or diaphragm walls are installed to keep excavation stable. These structures resist both earth and water forces, ensuring worker tujuh meter and structural reliability.
The Purpose of a Deep Foundation
4
The deeper a foundation goes, the more complex the load transfer becomes. Engineers calculate vertical loads (from the weight of the structure) and horizontal loads (from wind or seismic activity) to design reinforcement layouts.
Steel reinforcement bars are placed in both vertical and horizontal directions to create a grid that distributes forces evenly. This prevents concentrated stress that could lead to cracking. In some designs, engineers use tension piles or anchors to counteract uplift forces caused by groundwater pressure or buoyancy.
Properly reinforced deep foundations not only carry the building’s weight but also resist movement caused by environmental changes, nearby construction, or soil settlement.
The Purpose of a Deep Foundation
5
Working seven meters below ground introduces safety risks such as cave-ins, flooding, and low oxygen levels. To mitigate these, contractors follow strict safety standards:
-
Installing shoring and bracing systems to prevent collapse.
-
Continuous monitoring of groundwater inflow.
-
Providing safe access ladders and ventilation.
-
Using sensors or visual checks to detect soil movement.
-
Implementing emergency evacuation plans for workers.
Regular inspections ensure that protective systems remain effective as excavation progresses.
The Purpose of a Deep Foundation
6
Modern foundation engineering relies heavily on advanced equipment and technology. Drilling rigs with GPS positioning allow precise pile placement, while automated concrete pumps ensure consistent flow during deep pours. Laser leveling tools maintain exact excavation depths, and sensors monitor soil stability in real time.
Building information modeling (BIM) is also used to simulate ground conditions and visualize how loads move through the foundation. This helps engineers anticipate challenges before construction begins.
The Purpose of a Deep Foundation
7
Deep foundations can affect groundwater flow and nearby structures. Engineers conduct environmental assessments to ensure minimal disruption. When excavating near existing buildings, vibration monitoring helps prevent damage to surrounding properties.
Sustainability is another growing focus. Many projects now use low-carbon concrete, recycled steel reinforcement, and water-efficient dewatering systems. Designing for durability reduces the need for repairs, lowering the environmental impact over time.
The Purpose of a Deep Foundation
8
Even after construction, the foundation’s performance must be monitored. Over time, soil conditions may shift, groundwater levels may rise, and new loads may be added as the building evolves. Routine inspections check for settlement, cracks, or moisture infiltration. Early detection allows for timely repairs, preventing structural problems that could cost millions later.
Maintenance practices include keeping drainage systems clear, monitoring basement humidity, and checking for corrosion in exposed reinforcement. These measures ensure that the foundation remains stable throughout the structure’s lifespan.
The Purpose of a Deep Foundation
9
Building a foundation that reaches seven meters below ground is more than just digging deep—it’s a balance between science, skill, and foresight. Every layer of soil, every steel bar, and every cubic meter of concrete plays a role in supporting the structure above. The process demands attention to detail, strict adherence to design, and continuous supervision.
